Tag Archives: Westport Library MakerSpace

Staples Students Offer Light To The Homeless

As our nation’s housing crisis worsens, Americans want to help.

We donate funds, clothes and toiletries to organizations that work with unhoused people. We hope this lightens their burdens.

Two Staples High School students have given them light — literally.

Last summer, rising senior Shreyas Gorre and sophomore Rohan Sareen were looking for a way to use their engineering skills to help the community.

The teens designed a solar-powered lantern. Incorporating lights, wires, batteries and solar panels, they provide safety and comfort for people living many hours a day in darkness.

But how could 2 teenagers produce solar-powered lanterns?

With a 3D printer, naturally.

Rohan Sareen (left) and Shreyas Gorre, with solar-powered lanterns.

In November, Shreyas and Rohan invited residents to the Westport Library. There, they taught attendees — some of whom had no experience with the MakerSpace — how to assemble the lanterns. In addition to 3D printing, the project included soldering and circuitry.

Shreyas and Rohan know the MakerSpace well. They serve as senior coordinator and technology coordinator, respectively.

In late December — thanks to the Library Makerspace’s Ultimaker S5 and brand-new Bambu P1S 3D printer — the devices were finished.

Eight solar-powered lanterns were distributed to Open Doors, the Norwalk-based nonprofit that provides services to unhoused people.

The volunteers “loved seeing their printed parts turn into something that can truly improve lives,” Rohan says.

“It is incredible to see the work you have done have a real impact on the community,” Shreyas adds.

The 2 friends hope to run this program again this winter, with an updated lantern design and more volunteers. Anyone — of any age — interested in joining the program should email rohanjsareen@gmail.com or shreyasgorre@gmail.com.

Contributions to cover the costs for materials of these lanterns, and help fund similar projects at MakerSpace, are always welcome.  Click here to donate.

MORE LIGHT: This is not Shreyas Gorre’s first community-minded venture. Last spring, “06880” profiled his work with Serve2Sustain.

The non-profit workd with local tennis clubs to collect used balls. They’re sent to a facility where machinery separates materials for reuse. They then go to RecycleBalls and Laykold, which supplies tennis courts for events like the US Open. Click here for that story.

COVID-19 Roundup: MakerSpace Masks; Music Gigs; Sailplane Solo; Charitable Giving; More


The Westport Library is closed (though it’s online presence is more active than ever). But its MakerSpace is wide open — and doing its part to make and supply PPE to medical personnel across Connecticut.

Westport has partnered with other spaces in the region — Fairfield County Makers Guild in Norwalk; Make Haven in New Haven; Danbury Hacker Space — to assemble face shields. Ours is the only maker space affiliated with a library.

Led by Mike Altis, the MakerSpace has already 3D-printed more than 200 pieces of PPE, such as plastic headbands. After printing, parts are dropped off for final assembly at partnering maker spaces.

Mike prints a headband every 4 hours on the library’s two best 3D printers.

Due to a shortage and slow shipping of supplies, and the need for strict distancing guidelines (only one person in the space at a time), the Westport Library has not produced completed face masks itself.

Fortunately, Mike just received materials. Soon, he and his helpers will assemble completed face shields in their own space.

MakerSpace masks at the library.


Rothbard Ale + Larder posted on Facebook yesterday: “Rothbard will be closing permanently, but we hope this is not goodbye.

“Walrus Alley will be taking its place, with American southern-inspired flavors and dishes you are sure to enjoy. Stay tuned for the occasional Rothbard pop-up, especially in October.

“We hope to see you again.”


Trader Joe’s is closed again today. It is believed another employee contracted the coronavirus.


Like many musicians, 2007 Staples High School grad Drew Angus has been hit hard by the coronavirus.

All gigs through the end of May were canceled. So too have many through August. As a “non-traditional” worker, he’s had a tough time accessing federal and state unemployment benefits.

How’s he coping?

Creatively. After a successful Zoom happy hour for friends last week, he launched “Zoom Pop-Ins.” You can book Drew for a song (or a few) for online birthday parties, Mother’s Day, anniversaries, business meetings, happy hours, whatever. They work especially well as surprises. Click here for more info

Drew also offers drive-by concerts for anyone stuck at home in a 15-mile radius of Westport. He pulls into your driveway, stays safely away, opens his mobile sound system, and plays.

And he teaches virtual guitar and voice lessons. (“Pick up a new quarantine skill!” he suggests.)  Email DrewAngusMusic@gmail.com for concerts and lessons; click here for his website.

Finally, click here for his new single, Mr. Gemini — an introspective rock tune about understanding yourself. (If you buy it on Bandcamp, 85% goes directly to Drew.)

Here’s the stop-motion video. He made it with his marketing manager, Weston High graduate Shari Goldenberg. While strictly socially distancing, of course!


Robert Jacobs has found a new way to self-isolate: soaring solo in a sailplane.

Alone in the sky 8,000 feet above the earth — with no other aircraft around — he feels safe and joyful. The other day, he shot this video:


A reader writes: “My wife and I are looking more closely at our 2020 charitable giving. This is a year for priorities. We want to give where it will have the most immediate and needed benefit, starting with our general community and moving outwards from there.

“For us, food, health, and shelter will come first. Most everything else is on hold. That includes many other very worthy areas.”

How about it, readers. What are your priorities, and why? There are no wrong answers, just opinions. Click “Comments” below.


Spotco — Tommy Greenwald’s marketing, advertising and branding agency — is renowned for its work with Broadway shows.

But with the Great White Way dark, what can they do? Well, how about an uplifting, inspiring video starring Lin-Manuel Miranda?

In just 60 seconds, he manages to let everyone know that after this “intermission,” Broadway will be back with a great 2nd act; offer a way to help people in need, and also provide info on options to assist those in the industry. Take a peek:


Seen on the internet, and worth repeating: “You know all those small businesses you always ask to help out for your silent auction, program book or other fundraiser? Well, it’s time to repay the favor.”


And finally … thanks, Kelly Clarkson, for your words of wisdom!

Chris Lau’s 1,000th 3-D Print

Tons of people have tried out the Westport Library’s 3-D printer.

Some have made several prints. A few have gotten into the hundreds.

Last night, Chris Lau reached 1,000.

Staff members hosted a small celebration in the MakerSpace. The library’s Transformation Project has forced its relocation to the upper level balcony, from the Great Hall. But that did not stop Chris.

For a year, he’s printed small pieces on the MakerBot. His 1,000th piece was a bright green sneaker.

Alex Giannini — the library’s manager of experiential learning — encourages everyone to try to chase Chris’ record. To schedule a training session, email westportmakes@gmail.com

Chris Lau at work on the Westport Library’s 3-D printer.

 

Connor And Carson Einarsen’s Inconsistent Story

Move over, “The Swimmer.” Step aside, “Stepford Wives.”

“An Inconsistent Story in Stealing” is coming to town.

No, it’s not a big-budget, full-length feature film. But the movie being shot in Westport later this summer has something those 2 projects — and nearly every other film made here — did not:

Connor and Carson Einarsen.

The talented Staples alums — Connor graduated last year from Carleton College, with a degree in cinema and media studies; Carson followed this year from Savannah College of Art and Design, majoring in film and TV — are preparing their 2nd shoot.

Two years ago, the brothers made “Ryan Hood,” a 60-minute film for just $40. (They rented jackets for police officers).

Carson (left) and Connor (middle) Einarsen, directing "Ryan Hood."

Carson (left) and Connor (middle) Einarsen, directing “Ryan Hood.”

This one — “An Inconsistent Story in Stealing” — is more ambitious. Written by Carson, the neo-noir movie is about a former thief who is sucked back into the town she despises, to hunt down something she stole long ago.

There are 17 speaking parts, and 40 locations. One-third of the film will be shot at night, something most directors shy away from.

Pre-production takes place in June and July. Shooting is set for the 1st 3 weeks of August. In October “An Inconsistent Story” will be screened for the town. Then it’s off to film festivals around the world.

The Westport Library is helping, with a little bit of capital and a lot of resources. It’s one more way for the MakerSpace to expand its creative mission, Connor says.

In return, he and Carson will lead library classes for aspiring young filmmakers, and offer a film appreciation course.

The brothers are looking for actors and production assistants. If you’re interested, contact inconsistentstory@gmail.com.